Press Center
 
Home About us Products Support Quality & Certification Career Contact us
• Power Management
    Linear Regulators
    Low Dropout Linear Regulators
    DDR Termination Regulators
    Shunt Reference Regulators
    Step Down Switching Regulators
    Switching Regulator
    Step-Up DC-DC Converter
    PWM Controller
    White LED Driver
    Supervisory Circuit
    Voltage Detection and System R
    USB Power Switch
    Power Factor Control
    Li-Battery Protection or Charg
    FET Bias Controllers
    Combo IC
    Inverting DC-DC Converter
• Amplifier / Comparator
    Audio Amplifiers
    Operational Amplifier
    Voltage Comparator
• Analog Switches
    Video Signal Switch
    Analog Multiplexers, Demultipl
• Hall ICs
• Special Application ICs
    Motor Controller IC
    Interface and Driver Circuit
    Telecommunication Circuit
    Melody IC
    Alarm /Sound Generator IC
    Remote Controller IC
    Television Circuit
    Leakage Current Detector
    Automotive IC
    A-D or D-A Converters
    Miscellaneous
    Radio and Cassette Recorder Ci
    Timer
    Mouse&Keyboard Controller
    Transient Voltage Suppressors
    Sense Monitor
    Video Filter
    ZCB snubber
• Logic
• TRANSISTORs
• MOSFETs
    JFET
    Power Mosfet
• TRIACs
• SCRs
• DIODEs
 
Home >
PA3212 Datasheet

2.6W STEREO AUDIO AMPLIFIER WITH FOUR SELECTABLE GAIN SETTINGS AND MUX CONTROL  
 

 
DESCRIPTION

As operating on a single 5V supply, the UTC PA3212 is
capable of delivering 2.6W of output power per channel into 3Ω
loads. In Bridge-Tied Load (BTL) mode the UTC PA3212 has less
than 1% THD+N, and it also has less than 0.65% THD+N across
its specified frequency range when driving 1 W into 8-Ω speakers.
Way of two terminals (GAIN0 and GAIN1) can configure and
control the amplifier gain. It also provides BTL gain settings of 2, 6, 12 and 24 V/V.  
Other features included that the SHDN mode is provided to
disable UTC PA3212 for the low current consumption applications
and the current consumption can be reduced to typically 150µA.
 

 
FEATURES
 
* Output power at 0.65% THD+N, VDD=5V(TYP)
2.6W/CH (typical) into a 3Ω load
1.0W/CH (typical) into a 8Ω load
* Bridge-tied load (BTL) supported
* Gain control internally
* Differential Input fully
* Depop circuitry Inside
* Shutdown protection  
* Stereo input
About us  |  Products  |  Contact us
Copyright 2011 UTC All received